Friday, March 29, 2013

CF-Root for most I9003 firmwares



- All the credit to Skin for his cf-root and his great help in resolving issues.
- UtterChaos Kernel Credit goes to DoomLord and Napster.

- Cwm 5.0.2.8 (Credit Amit Bagaria)

XWLF2, DDLF2 and XXLE4 will require clean Firmware Flash for the CF-root to work.
If You are already using any other CF-root, these CF-roots won't probably work.
Flash the Firmware again and then flash the CF-root.


Here are the links.

JPKPH-CFROOT-26-03-2013.tar

ZCKPL-CFROOT-13-03-2013.tar

XWLJ2-CFROOT-15-02-2013.tar

POLJ1-CFROOT-08-11-2012.tar

XWLF3-CFROOT-12-07-2012.tar

XWLF2_CFROOT-05-07-2012.tar (CWM 5.0.2.8)
XWLF2-CFROOT-30-06-2012.tar

DDLF2_CFROOT-05-07-2012.tar (CWM 5.0.2.8)
DDLF2-CFROOT-30-06-2012.tar

XXLE4_CFROOT-05-07-2012.tar (CWM 5.0.2.8)
XXLE4-CFROOT-30-06-2012.tar

ZHKPE-CFROOT-25-05-2012.tar

JXKP3-CFROOT-25-05-2012.tar

XXKPU-CFROOT-29-02-2012.tar

DDKP3-CFROOT-12-02-2012.tar

DDKP2-CFROOT-23-12-2011.tar
DDKP2-CFROOT-19-12-2011.tar

DDKP1-CFROOT-23-12-2011.tar
DDKP1-CFROOT-19-12-2011.tar

XXKPQ-CFROOT-UCK-16-12-2011.tar
With UC Kernel V6.

CFROOT-XXKPQ-17-11-2011.tar
Module: tun.ko for XXKPQ.

CF-ROOT-XIKP2-16-11-2011.tar


CF-ROOT-ZHKPD-11-11-2011.tar
Module: tun.ko for ZHKPD.

CF-ROOT-XXKPN-09-11-2011.tar
Module: tun.ko for XXKPN.

CF-ROOT-XWKPG-08-11-2011

CF-ROOT-DXKP9-10-11-2011.tar
Module: tun.ko for DXKP9.

CF-ROOT-ZCKP9-12-11-2011.tar

Flash it with ODIN as PDA.


Quote:
Installing a new rom - This is the way I do it.

I really don't know about other's. But when I am moving to a new rom, I always follow these steps and have never had issues.


  • Read the concerned ROM post and if you dont understand ask for installation procedures.
  • Take backup of all the apps to external sd card. I prefer titanium backup.
  • Powerdown phone and Remove the external sd card.
  • Do a factory reset and reboot.
  • Start ODIN and fill in the required tabs as per requirement.
  • Go to Download mode on the phone and connect the phone to pc and ensure that ID:COM shows Yellow.
  • Flash the firmware and wait until the phone reboots and the odin shows green color.Now you can remove the usb cable.
  • Once rebooted, do a factory reset again.
  • From recovery clear Cache and reboot.
Once all the above are done and you have ensured that the phone is functioning normally, go for the mods.


Quote:
How to convert to Ext4
  1. First make a Nandroid Backup via CWM.
  2. Download the Ext4 convertor script here.
  3. Copy it to the root of the External Sd Card of the Phone.
  4. Go to Recovery.
  5. Flash the Ext4 Script. (Pl. Do not reboot the phone after this)
  6. Restore the Nandroid backup immediately.
  7. Reboot and enjoy Ext4.
Quote:
How to Un-Root

Download and flash this from recovery. UnRoot.zip
Quote:
How to port cf-root for all GB firmware (I9003): LINK
Enjoy

Disclaimer : I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE AND DO AT YOUR OWN RISK
Attached Files
File Type: tar Dxkp9.tun.ko.tar - [Click for QR Code] (210.0 KB, 2267 views)
File Type: zip xxkpn.tun.ko.zip - [Click for QR Code] (86.8 KB, 2133 views)
File Type: zip DDKP3.tun.ko.zip - [Click for QR Code] (86.8 KB, 779 views)

Murad Hssoain

0 comments:

Post a Comment

recoment

Google+ Followers

 

Copyright @ 2013 Galaxy Media One.

Designed by Templateify & Sponsored By Twigplay