Saturday, March 16, 2013

Samsung GT-S5301 Galaxy Pocket Plus Unbrick – Dead Boot repair supported Repairing bricked Samsung S5301 is easy with the RIFF Box.

 Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.
To resurrect Samsung S5301:
  •  Solder JTAG cable to Samsung S5301 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S5301 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.
.
samsung_galaxy_pocket_plus

Murad Hssoain

0 comments:

Post a Comment

recoment

Google+ Followers

 

Copyright @ 2013 Galaxy Media One.

Designed by Templateify & Sponsored By Twigplay