Saturday, December 12, 2015

SanDisk[SEM04G] Write Problem - [Huawei G630]

Hello Dear Support and GSM Users;
- Need to confirm the eMMC is physically Damaged or Unrecoverable.
- Phone Boots up but stuck at logo, Soldered and log is at the end of this post.
- It's Readable but not Writable, tried Build 2.0.6.0 and 2.0.4.0, got no success.

INFO:

Code:
Z3X EasyJtag Software ver. 2.0.4.0
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: XXXXXXXXXXXXXXXX, ,FW Ver.: 01.52
CMD Pullup Level:2052 mV
CMD Active Level:2485 mV
eMMC Device Information
EMMC CID : 45010053454D3034473C822DDC8F5136
EMMC CSD : D00F00320F5903FFFFFFFDFF8A4040A6
EMMC Manufacturer ID: 0045 , OEM ID: 0100
EMMC Date: 05/2014 Rev.0x3C
EMMC NAME: SEM04G , S/N: 2184043663
EMMC NAME (HEX): 53454D30344700 
EMMC ROM1 (Main User Data) Capacity: 3776 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
Backup saved: SEM04G_2184043663_20151103_1351.extcsd
Done.
READ:
Code:
Z3X EasyJtag Software ver. 2.0.4.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2052 mV
CMD Active Level:2485 mV
Output file :G:\eMMC\EMMC_ROM1_00000000_00020000__test.bin
Reading 0x000000020000 bytes from 0x000000000000 ...ROM1 ( USER ROM) 
Done. Read Speed: 526 kB/s
WRITE:
Code:
Checking NAND Image : G:\eMMC\EMMC_ROM1_00000000_00020000__test.bin
File successefuly loaded!
Processing file...G:\eMMC\EMMC_ROM1_00000000_00020000__test.bin
Z3X EasyJtag Software ver. 2.0.4.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2052 mV
CMD Active Level:2485 mV
Input file : G:\eMMC\EMMC_ROM1_00000000_00020000__test.bin
Writing 0000020000 bytes to 00000000 ...ROM1 (USER ROM)
Retry writing adress 0x00000000 (Attempt #1)...
Retry Fail!
Retry writing adress 0x00000000 (Attempt #2)...
Retry Fail!
Retry writing adress 0x00000000 (Attempt #3)...
Retry Fail!
Write Block Failed, Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD] 
Done.

Murad Hssoain

Galaxy Media One All Samsung Root File Download For Kiktak 4.4.4 Lollipop 5.1.1 5.02 How To Root And Unlock All Samsung And Unlock Solution Here. GSM Mobile Hardware Software Repair Area All China Flashing Box Update Setup Free Download Here Volcano Box, GPGDragon Box, Miracle Box Hayper Box Avaror Box Mobile Doctar Box HWK Box, ATF Box, Best Dongale, Cycolone Box, All Box Crack Download Z3X Box, Samsung Tools SeTool Octopus GPGemmc Box GPGemmc Box Gsm Aladdin ASANSAM And ETC Box Update Download All China Flash File Free Download All Nokia Flash File Download All Smart phone Update Solution Tools .

0 comments:

Post a Comment

 

Copyright @ 2013 Galaxy Media One.

SohidulBokulgoogle | google